Film Shampoo

Film Shampoo is designed for routine care of all types of automotive film finishes: matte, satin, and gloss. Its slightly alkaline pH helps remove light dirt and stubborn road film while remaining safe for the film’s structure. Regular use helps extend film life and it can also be used on painted surfaces.

Key points

• For matte, satin, and gloss films


• Slightly alkaline pH to tackle road film


• Safe for film structure


• Suitable for automotive paintwork

How to use

1. Perform a non-contact pre-wash using Neutral Snow Foam.


2. Mix approximately 25 ml of shampoo with 10 l of water.


3. Wash using the two-bucket method, starting from the roof and working downward, using a wool wash mitt and buckets with a separator.


4. Rinse thoroughly with water, preferably under pressure, to remove remaining dirt and debris.

Recommendations & care

• For a creamy foam effect, use a pressure washer to build the mixture (shampoo into the bucket first, then pressurized water).


• Make sure the surface is cool before washing.


• Avoid washing in direct sunlight or strong wind.


• Store in a cool, dry place at 5–25°C.


• Using a non-original stopper may cause the bottle to draw in; squeezing the bottle does not affect product quality.


• Do not expose to freezing or overheating.


• Do not allow the product to dry on the surface.


• Keep out of reach of children.