ULTRA HEAVY CUT

ULTRA HEAVY CUT is a coarse-grained, professional polishing paste built for fast removal of deep scratches and paint oxidation, and for eliminating sanding marks up to P1200. Solid abrasive grains maintain strong cutting performance, even on demanding automotive paint systems.

Free of silicone and fillers, it’s suitable for paint shops and professional detailing work. The formula is designed to minimize dusting and improve machine control. Used with Polishing-series pads, it supports efficient paint correction across all types of polishing machines. A fragrance composition is included to make extended use more pleasant.

Key features

• Very high cut; quick and easy to work


• Removes sanding marks (up to P1200), deep scratches, and oxidation


• No silicone or fillers


• Low dusting


• Compatible with all types of polishing machines and cutting pads


• Free from harmful solvents

Recommendations

1. Shake well before use to mix the paste thoroughly.


2. Apply an appropriate amount to the polishing pad.


3. Spread over the paint at low speed, then work small sections, adjusting speed and pressure as needed.


4. Monitor paint temperature to avoid overheating.


5. Work with moderate pressure until a characteristic film appears.


6. Wipe residue with a fine microfiber cloth.


7. Check results continuously with an inspection flashlight and inspection fluid; repeat if necessary.


8. Store in a dry, cool place at 15–25°C.