TOUCH-LESS is an eco-friendly pressure washer pre-clean and snow foam that can be applied using a pump spray or trigger. This biodegradable, sugar-based product offers exceptional cleaning for automotive paintwork at a dilution rate of 0.5% – 2% PIR (Panel Impact Ratio). Unlike petrochemical-based cleaners, TOUCH-LESS rinses easily, facilitating subsequent bucket washes and enhancing the bonding of post-treatments. It also contains corrosion inhibitors and is free from phosphates, solvents, NTA, and caustic soda. Available in a 1-litre bottle.

How To Use

TOUCH-LESS can be applied with a trigger spray, pump spray, pressure washer, or snow foam lance. The minimum recommended dilution rate is 0.5% PIR, increasing to 2% for heavily soiled vehicles. For trigger or pump spray applications, dilution is straightforward; however, when using pressure equipment, it is crucial to determine the water delivery to the equipment reservoir.

Step 1: Fill the detergent bottle or reservoir with plain water to capacity. Set the detergent feed to full. Discharge the lance into a large bucket until the detergent bottle is empty, then stop.

Step 2: To achieve a 2% dilution, measure the total amount collected and multiply by 0.02. This result indicates the amount of TOUCH-LESS to use.

Step 3: Add the calculated amount from Step 2 to the pressure washer reservoir, then fill with cold water and shake for a few moments.

Step 4: Apply TOUCH-LESS to the entire vehicle or panel by panel. Allow it to soak for 1-5 minutes (do not let it dry) before rinsing off with a power washer.

It is not necessary to use all diluted TOUCH-LESS in one wash; one litre of diluted product should last for 4-5 washes. Apply to cool panels in shaded conditions and keep the bottle neck and lid clean.

Capacity: 1l