Concentrated acid wheel cleaner formulated to remove stubborn rim contamination. It dissolves heavy brake dust deposits, rust, and mineral build-up. Intended for professional use.
Directions for Use
- Ensure the rim is cool to the touch and the work area is free from direct sunlight and gusts of wind.
- Prepare a solution matched to the level of contamination (use cold water).
- Remove loose dirt with “Bad Boys Traffic Film Remover”, then rinse the wheel thoroughly with pressurized water.
- Apply to a damp rim using the provided sprayer.
- Leave on the surface for a few minutes, ensuring it does not dry.
- Agitate with a brush, including hard-to-reach areas, without letting the product dry.
- Rinse thoroughly with pressurized water and wash with “Bad Boys Alkaline Shampoo” to remove and neutralize residues.
- Rinse again with a high-pressure cleaner and dry the surface.
- Repeat the last five steps if necessary.
Recommended Dilutions
- 1:1 to 1:4 for difficult contamination
- 1:10 for light contamination
Recommendations
- Test in an inconspicuous area before use.
- Use only on a pre-wetted surface.
- Wash rims one at a time.
- When preparing the solution, always pour acid into water.
- Use only cold water for dilution.
- Store tightly closed in a dry, cool place; avoid frost and overheating.
- Rinse the sprayer with water after each use.
- Protect from direct sunlight.
- Use appropriate protective clothing.
Attention
- Do not use on matte, chrome, polished, anodized, etc. rims.
- Do not allow the product to dry on the surface.
- Do not use on hot surfaces.
- Do not use concentrate.
- Avoid contact with glass.
