Concentrated acid wheel cleaner formulated to remove stubborn rim contamination. It dissolves heavy brake dust deposits, rust, and mineral build-up. Intended for professional use.

Directions for Use

1. Ensure the rim is cool to the touch and the work area is free from direct sunlight and gusts of wind.


2. Prepare a solution matched to the level of contamination (use cold water).


3. Remove loose dirt with “Bad Boys Traffic Film Remover”, then rinse the wheel thoroughly with pressurized water.


4. Apply to a damp rim using the provided sprayer.


5. Leave on the surface for a few minutes, ensuring it does not dry.


6. Agitate with a brush, including hard-to-reach areas, without letting the product dry.


7. Rinse thoroughly with pressurized water and wash with “Bad Boys Alkaline Shampoo” to remove and neutralize residues.


8. Rinse again with a high-pressure cleaner and dry the surface.


9. Repeat the last five steps if necessary.

Recommended Dilutions

• 1:1 to 1:4 for difficult contamination


• 1:10 for light contamination

Recommendations

• Test in an inconspicuous area before use.


• Use only on a pre-wetted surface.


• Wash rims one at a time.


• When preparing the solution, always pour acid into water.


• Use only cold water for dilution.


• Store tightly closed in a dry, cool place; avoid frost and overheating.


• Rinse the sprayer with water after each use.


• Protect from direct sunlight.


• Use appropriate protective clothing.

Attention

• Do not use on matte, chrome, polished, anodized, etc. rims.


• Do not allow the product to dry on the surface.


• Do not use on hot surfaces.


• Do not use concentrate.


• Avoid contact with glass.