Concentrated acid wheel cleaner formulated to remove stubborn contamination from rims. It dissolves heavy brake dust deposits, rust, and mineral build-up. Intended for professional use.

Directions for use

1. Ensure the rim is cool to the touch and the work area is free from direct sunlight and gusts of wind.


2. Dilute with cold water to match the level of contamination (see recommended dilutions below).


3. Remove loose dirt with “Bad Boys Traffic Film Remover”, then rinse the wheel thoroughly with pressurized water.


4. Apply to a damp rim using the supplied sprayer.


5. Leave on the surface for a few minutes, ensuring it does not dry.


6. Agitate with a brush, including hard-to-reach areas; do not allow the product to dry.


7. Rinse with water under pressure, then wash thoroughly with “Bad Boys Alkaline Shampoo” to remove and neutralize residues.


8. Rinse thoroughly with a high-pressure cleaner and dry the surface.


9. Repeat the last five steps if necessary.

Recommended dilutions

• 1:1 to 1:4 — for difficult contamination


• 1:10 — for light contamination

Recommendations

• Test in a less visible area before use.


• Use only on a pre-wetted surface.


• Wash rims one at a time.


• When preparing the solution, always pour acid into water.


• Use only cold water for dilution.


• Store tightly closed in a cool, dry place; avoid frost and overheating.


• Rinse the sprayer with water after each use.


• Protect from direct sunlight.


• Use appropriate protective clothing.

Attention

• Do not use on matte, chrome, polished, anodized, or similar rims.


• Do not allow the product to dry on the surface.


• Do not use on a hot surface.


• Do not use concentrate.


• Avoid contact with glass.