JE Pistons Ultra Series 361341 – forged piston kit Toyota 2JZ-GTE / 2JZ-GE

The JE 361341 set represents the top tier of JE’s Ultra Series—pistons engineered for extreme boost pressure and sky-high RPM in the legendary 2JZ platform. Forged from 2618-T6 aluminium using Aligned Grain Flow technology and protected by advanced thermal and low-friction coatings, they deliver bullet-proof reliability at power levels far beyond stock limits.

Key benefits

  • Aligned Grain Flow forging guides material fibres to follow the piston’s load paths, maximising fatigue strength under high boost.

  • Ceramic-thermal crown coating reflects heat back into the combustion chamber, lowering piston temperatures and improving scavenging.

  • Graphite skirt coating reduces friction, cold-start noise and cylinder-wall wear.

  • Lateral gas ports on the top ring land maintain ring seal at high RPM and boost.

  • Trend Performance wrist pins Ø 22 mm, thick-wall, ready for nitrous and big-boost abuse.

  • Matched ring pack included—profiles and tensions tailored for turbo, ethanol and high-output builds.

Typical applications

  • Drag, top-speed and pro-drift engines exceeding 1 000 hp

  • 2JZ-GTE street/strip builds using large single or twin turbos

  • Turbo-converted 2JZ-GE swaps replacing fragile OEM cast pistons

Technical specifications

Parameter Value
Bore diameter 86.00 mm / 3.386″
Compression ratio* 9.0 : 1 (-9.8 cc dish)
Compression height 34.0 mm / 1.338″
Material Forged 2618-T6 aluminium
Piston weight (bare) ≈ 354 g
Wrist-pin size 22 mm × 62 mm, thick-wall
Ring grooves 1.0 / 1.2 / 2.8 mm (top / 2nd / oil)
Quantity per kit 6 pistons
Compatible rods 142 mm length, full-floating pin

* With OEM 86 mm stroke and 2JZ-GTE combustion chamber.

Kit contents

  • 6 × JE Ultra Series pistons 361341

  • 6 × Trend Ø 22 mm wrist pins + locks

  • Complete ring set 1.0 / 1.2 / 2.8 mm

  • Installation guide with clearance and torque data

Installation notes

  • Maintain minimum 0.10 mm piston-to-wall clearance for street use; increase per JE chart for race/boosted setups.

  • Verify valve-to-piston clearances on lifts ≥ 11 mm; machine pockets if required.

  • Gap rings to match target boost (≈ 0.0055″ × bore for high-performance street, 0.0065–0.0070″ for > 30 psi).

  • Run high-zinc 5W-40 / 15W-50 oil and shorten change intervals on 800 hp+ engines.

Choose JE 361341—pistons built to take whatever horsepower you dare to unleash.



Vehicle Compatibility

Brand Model Generation / Chassis Engine
Toyota - - 2JZ-GTE / 2JZ-GE

JE

Founded in 1947 in Huntington Beach, California, JE Pistons is one of America's most respected manufacturers of high-performance forged pistons. Used in championship-winning race engines across drag racing and road racing, JE pistons are chosen by top engine builders for precision and reliability under extreme conditions.

Official page: jepistons.com

JE-Pistons Kit Toy 2JZ-GE/GTE (9.0:1) 86.00mm Ultra Series

Brand: JE Product id: 72147 MPN: JE-361341
EAN: 5903713182580
Availability: Ready to ship
2,138.51€
2,117.12€ Excl. VAT: 1,749.69€
Pay with PayPal / Card
Get it by

Tags: Engine\By Car Make\Toyota\2JZ,

Brand Model Generation Engine
Toyota - - 2JZ-GTE / 2JZ-GE
Founded in 1947 in Huntington Beach, California, JE Pistons is one of America's most respected manufacturers of high-performance forged pistons. Used in championship-winning race engines across drag racing and road racing, JE pistons are chosen by top engine builders for precision and reliability under extreme conditions.

Official page: jepistons.com