This all-in-one cleaner, polish, and protectant is designed to renew neglected paint, restore gloss, and help protect against future weathering. Micro-abrasives gently restore clarity by removing brake dust, light water spots, minor swirls, and other mild contaminants that normal washing can leave behind. A carnauba-polymer wax blend enhances gloss and brightens dulling surfaces, leaving durable protection for a single-step product.

Surface Compatibility

• For clear coat and single stage exterior automotive paint
• Not for use on non-painted plastic trim, vinyl, rubber, or glass

Directions

Place finger over cap and shake well before using. Surface should be pre-cleaned (washed), dry, and feel lukewarm to the touch.

By Hand

1. Apply a small amount of No. 325 to a microfiber applicator pad and spread evenly over a 2 ft x 2 ft section.
2. Rub as needed to loosen surface contaminants/light oxidation.
3. As the product begins to dry, polish off with a dry microfiber towel.
4. Reapply as necessary for stubborn contamination.

By DA Machine

1. Apply 5–6 pea-size drops to a foam polishing pad.
2. Set machine speed between 4800–5800 OPM. Place the pad directly on the paint before turning the machine on to avoid sling.
3. Work a 2 ft x 2 ft section: spread the product evenly, then turn the machine on and apply moderate pressure.
4. Use an overlapping/cross-hatching pattern for 4–5 passes.
5. Before the product completely dries, remove with a dry microfiber towel.

Optional Follow-Up

For added protective durability on a clean surface, follow with one of Collinite’s last step waxes (No. 845, 476, or 915).

Size

16 oz / 473 ml

Handcrafted and hand-poured in the USA.