Collinite No.100 Beadcoat SiO2 + Graphene Spray Sealant is an easy-to-use spray sealant built on an SiO2 + graphene / functional ceramic-graphene resin structure. It delivers ultra-durable water behavior, a high-gloss, slick finish, and 6+ months of stand-alone paint protection with UV- and detergent-resistant shine. It can also be used to enhance and preserve existing ceramic or graphene coatings.

Safe for paint, glass, wheels, and exterior trim.

Size & Coverage

• Available in 473 ml / 16 fl oz
• Average spread/coverage: 600–1,000 sq ft

Designed For

• 6+ months of stand-alone paint protection
• Extreme hydrophobic beading effect
• Use over ceramic coatings and paint protection film
• Paint, glass, wheels, exterior trim
• Easy wipe on / wipe off high-gloss shine
• Drying aid (once a base layer is applied)
• UV- and detergent-resistant

Not Designed For

• Removal of surface defects (swirls, scratches)
• Use on contaminated surfaces not treated by iron (chemical) or clay (mechanical) processes
• Interior surfaces
• Tires
• Application over waxes and sealants
• Hot surfaces

Prep & Use Notes

• Always test first in a small, inconspicuous area to ensure the desired result.
• For optimal bond/protection, ensure the surface is free of above-surface contamination (iron remover + clay process). Below-surface paint imperfections (swirls/scratches/marring) should be removed by DA polish.

As a Lubricating Drying Aid

Following a wash, while the surface is still wet, apply 2 sprays to one 3×3 ft panel at a time. Wipe the entire panel until dry using a microfiber towel. Flip the towel as necessary and change towels as they become saturated. Repeat on all painted surfaces (and glass). This process is only recommended if a previous base coat of Beadcoat has been applied.