CANchecked MFD15 Gen2 Display for Ford Fiesta MK6/7
The CANchecked MFD15 Gen2 is a compact 52 mm OLED display designed to keep key engine and vehicle data in view. The OLED panel remains readable in direct sunlight. With an outer diameter of 52 mm and only 12.5 mm depth, it fits common gauge bezels even without a vehicle-specific holder. Operation is via two windshield-mounted push buttons, or an optional external rotary knob.
Key features
- Compact packaging: 52 mm diameter, 12.5 mm depth
- Front LED: configurable as a shift light and/or warning LED
- CAN bus support: CAN bus ECUs, OBD2 (from 2008), in-depth values for VW/Audi (from 2008), or user-built CAN stream
- WLAN: connect to smartphone or PC for setup via Web UI (oDSS)
- Analog inputs: up to 6 sensors (linear 0–5 V and NTC); optional direct ethanol sensor support (license required)
- Alarms: predefined alarms can be enabled and customized (example: EGT alert above 900 °C)
- Customization: user startup logo and background image
- Online logging: logging via smartphone/PC (license required)
- Flex Fuel: ethanol content and temperature display (license required)
- CAN switching / AIN forwarding: switch CAN functions and forward analog inputs to CAN (license required)
Display layouts
You can configure up to eight pages and choose from multiple view types, including:
- Analog pointer
- Double value
- Gear indicator
- 4-fold values
- 6-fold values
- Bar + double display
- Round display
- Bar graph (double across)
- Performance Meter
- Bar chart (1–6-fold upright)
- Single value
oDSS setup via WLAN
The MFD15 Gen2 can be accessed over WLAN, allowing setup from a smartphone or PC. In oDSS you can configure the display, upload your startup image, update the device, and log values (logging requires a license).
Supported ECU values and protocols
The MFD15 Gen2 is compatible with ISO 11898-2 and SAE J2284. Which parameters are available depends on what your ECU broadcasts on CAN; documentation (for example a DBC file) can be imported via DSS. Depending on the manufacturer, up to 64 sensors can be queried.
OBD2 queries via CAN (11-bit/29-bit) are supported, as well as vehicle-specific protocols such as UDS and TP2.
Included by default:
- OBD2 (11-bit and 29-bit)
- Ecumaster (Classic and Black)
- VAG PQ34
- Haltech v2
- LinkECU
- MaxxECU
- Motec M1
- Emtron
- Megasquirt 2 and 3
If an ECU is not listed, the appropriate TRI/TRX can be downloaded or requested from the database.
For VW/Audi from model year 2008, in-depth protocol-based queries are available, including values such as oil temperature, boost pressure, transmission temperature, cylinder-selective ignition angle correction, high/low pressure, wastegate actuation, and more.
Internal LED (shift light / warning)
The internal LED can be configured as a shift light or as a warning LED.
- Shift light: assign up to 8 colors, RPM limits, and a start point for flashing.
- Warning LED: set min/max limits per sensor in oDSS; if a sensor exceeds a limit, the LED flashes in the configured color. During a warning, the shift light function is disabled.
Connections and expansion
Six analog inputs support linear 0–5 V sensors and NTC sensors.
Default CANchecked sensor mappings stored in TRI/TRX files:
- AIN1: Temperature sensor
- AIN2: Type K EGT transducer (0–1250 °C)
- AIN3: Pressure sensor (0–10 bar)
- AIN4: Boost pressure sensor (0–5.5 bar absolute)
- AIN5: Not preconfigured
- AIN6: Not preconfigured
A pre-assembled 4-way AIN harness can be used for connection. With the appropriate license, an ethanol sensor can be connected directly to the display via a separate pin.
What’s included
- MFD15 Gen2 display
- Connector B (6-way)
- Connector C (12-way)
- 20 cm pre-crimped connection cables for power supply, CAN bus, analog inputs, 5 V, and sensor ground
- Pins to crimp yourself
- Two 1 kΩ resistors (NTC pull-up)
- Car-specific air vent bezel
- OBD connection cable
Optional accessories
- CC22501 ETK01: External rotary knob with PnP 50 cm connection cable
- CC22100 CBD08: 8-way CAN distribution hub
- CC22902 NTC01: Temperature sensor for liquids, 1/8" NPT
- CC22903 TCC01: Type K transducer, 0–1250 °C
- CC22901 FLP01: Pressure sensor, 0–10 bar (145 psi), M10x1
- CC22900 BST01: Pressure sensor, 0–5.5 bar absolute (80 psi)
Additional licenses
Live Logging
Enables sensor logging into oDSS, with downloads to smartphone or PC. Note: for OBD and UDS, only the currently displayed sensors are logged.
Flex Fuel (ethanol sensor direct to MFD15 Gen2)
Enables direct connection of an ethanol sensor to the display. A 10 kΩ pull-up resistor is required between 5 V and the signal wire. Ethanol content and fuel temperature can be displayed and logged.
CAN Switching and AIN forwarding
Enables using the display buttons or rotary knob to switch CAN functions and forward analog input voltages to the CAN bus.
Vehicle Compatibility
| Brand | Model | Generation / Chassis | Engine |
|---|---|---|---|
| Ford | Fiesta | MK6/MK7 | - |
| Ford | Fiesta ST | MK6/MK7 | - |
CANchecked Multi Function Display MFD15 GEN2 for Ford Fiesta ST MK6 MK7 LHD / RHD 2001 - 2016
| Brand | Model | Generation | Engine |
|---|---|---|---|
| Ford | Fiesta | MK6/MK7 | - |
| Ford | Fiesta ST | MK6/MK7 | - |
CANchecked