Ultra Heavy Cut

Ultra Heavy Cut is a coarse-grain professional polishing paste built for fast removal of deep scratches, paint oxidation, and sanding marks down to P1200. Solid abrasive grains maintain strong cut even on hard, demanding clear coats. The formula is silicone- and filler-free, making it suitable for paint shops and professional detailing work. It’s designed to dust less and improve machine control, and pairs well with Polishing-series pads for effective paint correction. Suitable for use with all types of polishing machines and finished with a fragrance composition to make extended polishing sessions more pleasant.

Key features

• Easy and quick to work with


• Very high abrasion level


• Effective at removing sanding marks


• No silicone or fillers


• Low dusting


• Works with all types of polishing machines and cutting pads


• Free from harmful solvents

Recommendations

1. Shake well before use to fully mix the paste.


2. Apply an appropriate amount to the polishing pad.


3. Spread over the paintwork at low machine speed.


4. Work small sections, adjusting speed and pressure as needed.


5. Monitor paint temperature to prevent overheating.


6. Work with moderate pressure until a characteristic film appears.


7. Remove residue with a fine microfiber cloth.


8. Check correction results with an inspection flashlight and inspection fluid; repeat if necessary.


9. Store in a cool, dry place at 15–25°C.