BadBoys Tar & Glue Remover

Fast-acting remover for stubborn contamination on painted and glass surfaces, including tar, asphalt residue, oil stains, grease, and sun-hardened adhesive. Also effective on silicones, waxes, and adhered rubber. On tar, it reacts quickly and you’ll typically see dark-brown runoff as the contamination dissolves.

Well suited for paint preparation before polishing or wax application, and as a step when restoring the performance of ceramic coatings. Intended for professional use.

Usage

• If needed, remove road film with a Traffic Film Remover and rinse thoroughly with pressurized water.


• If metal contamination is present, use an Iron Remover, rinse, then wash thoroughly with shampoo.


• Apply to a clean, dry surface using a spray bottle.


• Allow it to work until a visible reaction occurs; do not let it dry.


• Work in small sections.


• Agitate with a soft microfiber cloth, or use a gentle detailing brush for tight areas (e.g., wheels).


• Rinse thoroughly with pressurized water, then shampoo-wash to remove any residue.


• Repeat if necessary.

Recommendations

• Use with caution on color-change wraps, PPF films, and headlight lenses; the product may leave a white residue.


• Always spot-test on plastic surfaces before full application.


• Rinse the spray nozzle thoroughly with water after each use to help prevent damage.


• Do not apply on hot surfaces or in direct sunlight.


• Test on an inconspicuous area before use.


• Do not use on single-stage paint.