BadBoys Tar & Glue Remover

Fast-acting remover for stubborn contamination on painted and glass surfaces, including tar, asphalt residue, oil stains, grease, and sun-hardened adhesive. Also helps remove silicones, waxes, and adhered rubber. On tar, the reaction is visible as a dark brown runoff of dissolved particles.

Recommended for paint preparation before polishing or wax application, and as a key step when restoring the performance of ceramic coatings. Intended for professional use.

How to use

1. If needed, remove road film using a Traffic Film Remover, then rinse thoroughly with water under pressure.


2. If metal contamination is present, use an Iron Remover, rinse, then wash the vehicle thoroughly with shampoo.


3. Apply to a clean, dry surface using a spray bottle.


4. Allow it to work until a visible reaction occurs; do not let it dry.


5. Work one small section at a time.


6. Agitate with a soft microfiber cloth, or use a gentle detailing brush for tight areas (for example, wheels).


7. Rinse thoroughly with water under pressure, then wash with shampoo to remove any residue.


8. Repeat if necessary.

Recommendations

• Use with caution on color-change wraps, PPF films, and headlight lenses; the product may leave a white residue.


• Always spot-test on plastic surfaces before full application.


• Rinse the spray nozzle thoroughly with water after each use to prevent damage.


• Do not apply on hot surfaces or in direct sunlight.


• Test on an inconspicuous area before use.


• Do not use on single-stage paint.