Collinite No. 150 Slickr Ceramic 3 in 1

Slickr is a versatile booster, drying aid, and topper built on an SiO2 + polymer structure. It adds fast hydrophobic water beading and an extremely slick, high-gloss finish on a wide range of exterior surfaces.

Use it as a stand-alone protectant or as a booster over existing waxes, sealants, ceramic/graphene coatings, or paint protection film to enhance shine and add protection. It can also be used as a drying aid, clay lubricant, or final inspection detailer to remove light dust, fingerprints, and smudges. Safe for paint, glass, wheels, and trim.

Specs

• Size: 473 ml / 16 fl oz
• Average spread/coverage: 600–1,000 sq ft
• Hydrophobics: up to 3 months

How to Use

• Lubricating drying aid: After washing while the surface is still wet, apply 2 sprays to one 3×3 ft panel at a time. Wipe the panel until dry with a microfiber towel, flipping and changing towels as they become saturated. Repeat on painted surfaces and glass.
• Clay lubricant: Apply 2 sprays directly onto a decon towel (rubberized side). With minimal pressure, move over a 3×3 ft panel in a cross-hatch, overlapping pattern. Apply additional product as needed to maintain slickness and avoid marring. Remove remaining product with a dry microfiber towel. Repeat on painted surfaces and glass.

Tip: Always test first in a small, inconspicuous area to ensure the desired result.

Designed For

• Paint, glass, wheels, and trim
• Extremely slick finish
• Removing light dust, fingerprints, and smudges
• Easy wipe on, wipe off high-gloss shine
• Clay lubricant, drying aid, show car prep
• Topper over waxes, sealants, ceramic coatings, and paint protection film

Not Designed For

• Interior surfaces (leather, vinyl, dash)
• Removing surface defects, swirls, or scratches
• Tires
• Heavily soiled or contaminated surfaces